How to Fix Windows Error Code WHEA (WHEA_UNCORRECTABLE_ERROR)

Last updated on February 9th, 2024 at 01:04 pm

It is possible for your computer to crash or display a (BSoD) “Blue Screen of Death” due to a WHEA_UNCORRECTABLE_ERROR error, also known as a WHEA error. It is typical for your computer to compile some diagnostic data before resetting when this error occurs.

You will encounter the same WHEA uncorrectable error message again if the root problem persists. Usually, this error is due to a hardware problem, such as a malfunctioning Processor, memory, or another essential component.

It can be really frustrating to receive the Windows error code WHEA. But, no more as we have some fixes to this problem. So, let’s find out what those fixes are by reading the guide until the end.

Contents

What Is the WHEA Uncorrectable Error?

Windows Hardware Error Architecture stands for Windows Hardware Error Architecture, and it signifies a hardware failure that prevents your Windows 10/11 PC from functioning properly. WHEA errors normally appear in blue screens of death (BSOD) situations that require shutting down or restarting the computer to resolve.

Also Check:

What Are the Causes of the Windows WHEA Uncorrectable Error?

WHEA uncorrectable errors: what causes them? There are several types of BOSD errors, including the Windows error code WHEA uncorrectable. In most cases, this error is caused by five factors:

Invalid BCD
Error in the MBR or system file
Hardware driver issue
It could be a faulty hard drive or processor
Insufficient CPU voltage or overheating CPU/hard drive

How to Fix Windows Error Code WHEA (WHEA_UNCORRECTABLE_ERROR)

Despite the fact that WHEA is termed an “Uncorrectable Error,” it may not be impossible to correct the problem. Yet, you can still try these methods and see if they work:

Fix 1: Run Chkdsk

Whenever you encounter a Windows error code WHEA Uncorrectable, the first thing you should do is run Chkdsk. Using Chkdsk (short for “Check Disk”), you can often determine the exact cause of your error by scanning your hardware for problems.

Initially, open the Command Prompt using admin rights.
Now, run the command: chkdsk c: /f
Then, type Y and hit Enter

Fix 2: Check Hardware Issues

WHEA_UNCORRECTABLE_ERROR or WHEA can also be caused by hardware malfunctions on your computer due to which you receive a blue screen error.

To troubleshoot Windows error code WHEA, it’s a good idea to check your system hardware before trying various fixes. Therefore, you can check how much RAM and CPU is being used. In addition, there are some tools you can use to test hardware. To test your memory, you can use the Windows Memory Diagnostic Tool.

On the Internet, you can find many hardware diagnostic tools today. There are a number of reliable hardware diagnostic tools that can be used if you are not aware of how to check Windows hardware error architecture.

Fix 3: Disable Overclocking in BIOS

Unless you resolve the root problem, you will see the same WHEA uncorrectable error message again. In most cases, the Windows error code Whea Uncorrectable is caused by a hardware problem.

It will also cause many other problems, such as overheating. Well, when our hardware is not good enough, then what’s the point to overclock it? Then, you can manually disable Overclocking in your BIOS. As a reference, here are detailed steps.

To change settings, right-click the Windows Start Menu and select Settings.
On the Update and Security tab, locate the Recovery button.
In Advanced Startup, click Restart now.
Navigate to Troubleshoot > Advanced options > UEFI Firmware Settings.
Then click Restart.
When the computer is restarted, the BIOS should automatically open. Next, click on Advanced.
Go to Performance and look for Overclocking.
Ensure that overclocking is disabled.
Make sure you save changes to your BIOS and restart your computer.

Fix 4: Check the Drivers on Your PC

You may find that the Windows error code WHEA problem is related to your PC’s drivers if you have installed a new hardware driver or upgraded your operating System. If the drivers on your PC are damaged or outdated, you can check them. To check it now, simply follow the steps below.

Initially, in Windows 10/11, right-click the start menu and choose Device Manager.
To open Run, press Windows key + R. Type devmgmt.msc and click OK.
Expand the Disk drivers.
Whenever you see any yellow or red signal in any device, you need to update the driver.

Fix 5: Reset Your BIOS/UEFI Settings

Your BIOS/UEFI overlock settings need to be cleared first before resetting your BIOS can fix WHEA_UNCORRECTABLE_ERROR. Under the BIOS menu, you can either complete a full BIOS settings reset or load the default BIOS settings. Choose the option you want.

Fix 6: Update Your BIOS/UEFI Settings

Once again, the process is heavily influenced by the motherboard manufacturer of your System. It is possible to automatically download and update the BIOS/UEFI settings through a desktop utility. It is also necessary to download the BIOS update and flash the firmware yourself with other manufacturers.

You can download CPU-Z and run it. Click the Mainboard tab and find out which manufacturer and model your motherboard is. In this tab, you can also find your BIOS brand and version.

Once you have this knowledge, search the Internet for a [your motherboard manufacturer + model] bios update. In my case, I would type micro-star ms-1796 bios update if I wanted to find a micro-star ms-1796 bios update.

Fix 7: Restore Windows Back to an Earlier Point

Using an earlier version of Windows, you can undo the changes that led to the Windows Error Code WHEA issue on your computer.

In Windows 10/11, open the Control Panel and select System and Security. Choose System from the menu.
In System, choose System Protection. So, now in the System Properties window that appears, click on the System Restore option.
Then click Next in the Restore system files and Settings window.
You will now be able to select from a list of restore points. Click OK to continue.
Then, hit the Finish button.

Fix 8: MBR and System File Error

A good way to get around the whea_uncorrectable_error Windows 10/11 problem is to fix the MBR. In order to do this, open the command prompt using admin rights and perform these steps:

When the Command Prompt opens, enter the following commands:

Bootrec.exe/fixmbr
Bootrec.exe/fixboot
Bootrec.exe/rebuildbcd

Restart your computer after the process is complete.

Also Read:

So, that’s how you can easily fix the Windows error code WHEA orWHEA_UNCORRECTABLE_ERROR. It’s our hope that this guide has helped you. In case you need any further help, comment below and let us know.

How to Fix Windows Error Code WHEA (WHEA_UNCORRECTABLE_ERROR)

What Is the WHEA Uncorrectable Error?

What Are the Causes of the Windows WHEA Uncorrectable Error?